Developed for HEAVY VEHICLES FACTORY is used to lubricate the engine parts before starting. It consists of a dc motor and a gear pump. Pressure relief valves are provided for safety of the pump.
Developed for Ordnance Factor, Medak it is usedto pre-heat and cool the engine. It consists of a single dc motor which drives an air blower, water pump and a fuel pump.
Developed for Engine Factory Avadi the pump provides lubrication to all the moving parts in the engine. It has three suction ports and two delvery ports. Pressure relief valve is provided to maintain the oil pressure. It gives a discharge of 360 litres /min.
This pump is used in the oil refinery for pumping oil.
Developed for Kerala Agro Machinery Corporation it is a cost effective pump used for lubrication purpose where the disharge and working pressure is low. Modification of the pump is possible and a modified version has been developed for Kirloskar Toyoda Textile Machinery Manufacturer.
Oil pump developed for Mayekawa, Japan. Runs at 1000 RPM with an outlet pressure of 0.5 Mpa and delivers 15 LPM.
Developed for Engine Factory Avadi the pump injects fuel for heating the coolant which in turn heats the engine.
Pneumatic and Hydraulic valves developed for Defence factories.