OIL PRIMING PUMP

Developed for HEAVY VEHICLES FACTORY is used to lubricate the engine parts before starting. It consists of a dc motor and a gear pump. Pressure relief valves are provided for safety of the pump.

PRE HEATER REDUCTION GEAR

Developed for Ordnance Factor, Medak it is usedto pre-heat and cool the engine. It consists of a single dc motor which drives an air blower, water pump and a fuel pump.

OIL PUMP ASSEMBLY FOR UTD-20 ENGINE

Developed for Engine Factory Avadi the pump provides lubrication to all the moving parts in the engine. It has three suction ports and two delvery ports. Pressure relief valve is provided to maintain the oil pressure. It gives a discharge of 360 litres /min.

AIR DISTRIBUTOR ASSEMBLY

This equipnment is a part of the Pneumatic Back up Sytem. It provides compressed air to all the engine cyclinders.

TROCHOICADAL OIL PUMP

Developed for Kerala Agro Machinery Corporation it is a cost effective pump used for lubrication purpose where the disharge and working pressure is low. Modification of the pump is possible and a modified version has been developed for Kirloskar Toyoda Textile Machinery Manufacturer.

GEAR PUMP

Gear pump developed for Heavy Vehicle Factory. Range of gear pumps spanning up to 200kg.

FUEL FEED PUMP

Developed for Engine Factory Avadi the pump injects fuel for heating the coolant which in turn heats the engine.

COCK ASSEMBLY, VALVE ASSEMBLY, RELIEF VALVE

Maintains coolant pressure during the rise and fall in the coolant temperature.

KEEPER VALVE, BUSHING VALVE INTAKE & EXHAUST

Engine components developed for General Electric, USA.